Home / Fence style calculators
Fence Calculator with Structure
Work out materials for a fence broken up by buildings: enter each section (A, B, C, D, E) separately.
Your result
Enter your numbers and press the button. Your result appears here.
Calculation Formula
Posts
\[\text{Number of Posts} = \sum_{i} \left( \left\lceil \frac{L_i}{\text{Post Spacing}} \right\rceil + 1 \right)\]
Rails
\[\text{Total Number of Rails} = \sum_{i} \left\lceil \frac{L_i}{\text{Post Spacing}} \right\rceil \times \text{Number of Rails}\]
Pickets
\[\text{Number of Pickets} = \sum_{i} \left\lceil \frac{L_i \times 12 + \text{Picket Gap}}{\text{Picket Width} + \text{Picket Gap}} \right\rceil\]
Concrete
\[\text{Bags per Post} = \left\lceil \frac{\left(\pi \left(\frac{D}{2}\right)^2 - w^2\right) \times d \div 1728}{0.375} \right\rceil\]
Fasteners
\[\text{Picket Fasteners} = \text{Number of Pickets} \times \text{Number of Rails} \times 2\]
Lᵢ is the length of each section between buildings in feet. Each section starts and ends with its own post. D is the hole diameter (3 × the post width), w is the actual post width (3½ in for a 4×4), d is the depth of concrete in inches and 0.375 ft³ is the yield of a 50 lb bag of fast-setting concrete. Posts go in the ground half as deep as the fence is tall, with 6 in of gravel underneath.
Example: 130 ft of fence needs 22 posts, 51 rails, 286 pickets and 110 bags of fast-setting concrete.

Rules of thumb
| Item | Typical |
|---|---|
| Depth in the ground | ⅓ of the post length, or below the frost line |
| Hole width | About 3 × the post width |
| Wood post spacing | 6 to 8 ft |
| Chain link line posts | No more than 10 ft |
| T-posts for barbed wire | 8 to 12 ft |
| Field fence | Wood posts 8–10 ft, T-posts 6–8 ft |
Common questions
How many rails does a fence need?
Two rails for fences up to about 4 ft, three for 5 to 6 ft and four for 8 ft fences.
Should posts be 4×4 or 6×6?
4×4 posts are standard for fences up to 6 ft. Use 6×6 for 8 ft fences, gate posts and windy sites.
How long should fence posts be?
Height above ground plus the depth in the ground. For a 6 ft fence that is usually a 9 ft post, so buy 10 ft stock and cut it, or set 8 ft posts deeper only where frost and soil allow.
How many pickets are in an 8 ft section?
With 5½ in pickets butted together, 96 ÷ 5.5 = 17.5, so 18 pickets. With 3½ in pickets and 2½ in gaps, 17.
Sources
- Quikrete, Concrete Mix data sheet (bag yields): https://www.quikrete.com/PDFs/DATA_SHEET-Concrete%20Mix%201101.pdf
- Quikrete, project calculator (post depth example): https://www.quikrete.com/calculator/