Home / Lumber sizes
Lumber Size Calculator for Fences
Convert nominal lumber sizes to actual sizes for fence posts, rails and boards.
Your result
Enter your numbers and press the button. Your result appears here.
Lumber is named by its rough-sawn size. After drying and planing, a 1×6 is actually ¾ in by 5½ in.
Why lumber is smaller than its name
Lumber is named by its rough-sawn size. Drying and planing take about ½ in off sizes up to 6 in and ¾ in off 8 in and wider boards, under the American Softwood Lumber Standard.
A 1×6 measures 0.75 × 5.5 in (19 × 140 mm). Covering 8 ft side by side takes 18 boards.
Nominal and actual sizes
| Nominal | Actual (dry) |
|---|---|
| 1 in | ¾ in |
| 5/4 in | 1 in |
| 2 in | 1½ in |
| 4 in | 3½ in |
| 6 in | 5½ in |
| 8 in | 7¼ in |
| 10 in | 9¼ in |
| 12 in | 11¼ in |
Under the American Softwood Lumber Standard (PS 20).
All lumber sizes calculators
Common questions
Why is a 2×4 not 2 by 4 inches?
The name is the rough-sawn size. After drying and planing it is 1½ by 3½ inches.
Are fence pickets full size?
Not always. Many cedar pickets are 5/8 in thick instead of ¾ in, and dog-ear pickets are usually 5½ in wide.
Sources
- NIST, American Softwood Lumber Standard (PS 20): https://www.nist.gov/standardsgov/voluntary-product-standards-program